Transmission fluid change

[George B]

Duplicate post deleted

 

[Bob2C]

If anyone needs some. Was 13 bucks yesterday. 17 not bad.




Sent from my iPhone using Tapatalk

 

[SnowDrifter]

What kind of straw are you using to insert into fill tube? And pump?


Sent from my iPhone using Tapatalk

One of these but pneumatic. That long flexible straw that it comes with is a godsend!

https://www.amazon.com/EWK-Extracto...=transmission+fluid+eva,automotive,210&sr=1-8

 

[smokey_mountain]

I bought a very much the same Pela extractor but a) metal re-enforced tube is a bit short and it did not go into the dipstick to reach the fluid in the pan (I guess there are two tight turns; b) anyone knows if there is a longer but still metal re-enforced thin hose that we can attach to reach the fluid. My transmission is 2018 6-speed.

One of these but pneumatic. That long flexible straw that it comes with is a godsend!

https://www.amazon.com/EWK-Extractor-Changer-Fluid-Evacuator/dp/B079FJ21DV/ref=sr_1_8?crid=2PE1FNIR4MWK3&keywords=transmission+fluid+evacuator&qid=1583308914&s=automotive&sprefix=transmission+fluid+eva,automotive,210&sr=1-8

 

[ladorn45]

If anyone needs some. Was 13 bucks yesterday. 17 not bad.




Sent from my iPhone using Tapatalk

Do i use this fluid for a 2001 tahoe as well. I know 05 are the same for alot of things but just want to make sure thanks

 

[Bob2C]

Do i use this fluid for a 2001 tahoe as well. I know 05 are the same for alot of things but just want to make sure thanks

I’m not too sure. There are others on here that might know


Sent from my iPhone using Tapatalk

 

[SnowDrifter]

I bought a very much the same Pela extractor but a) metal re-enforced tube is a bit short and it did not go into the dipstick to reach the fluid in the pan (I guess there are two tight turns; b) anyone knows if there is a longer but still metal re-enforced thin hose that we can attach to reach the fluid. My transmission is 2018 6-speed.

Go to a bicycle shop, get some of the stiff brake / shifter cable guides, cut to length, get a rubber stopper or cork that fits your flexi plastic tubing and that, press fit, and there ya go