What did you do to your 2015-2020 K2XX Tahoe/Yukon Today?

[Bob2C]

Washed and waxed only to get pummeled by road salt on our Thanksgiving road trip up north in 2 weeks. Ugh

 

[Staggered 02]

Back in Louisiana and back on the grind. Last Escalade action for this time around was to send the braces that I did obtain from the wish list off to the powder coat shop in Tampa to get coated. They should arrive there no later than mid next week.

Parts should be ready for me to pick up or get sent to the house when they are coated and waiting on me to continue with the mods.

 

[LT1ZOB]

Installed the GM recovery hooks and new airdam that goes with it. A big thanks to member Tk59194 for his write up and sharing part numbers via PM(also Pwtr02ss for pointing me to Tk’s original write up). Took about an hour and a half. I could have done without the ice and saltwater dripping on my face though. But ‘‘tis the season in MI.

 

[cmatt]

Looks great!


Sent from my iPad using Tapatalk

 

[LT1ZOB]

Leather interior swap completed. In hindsight, the front seats were so much easier than the 60/40 bench style. So heavy, a pain to move around and work on. But I’m very happy with the end result

 

[Dock_Rocker]

Installed the GM recovery hooks and new airdam that goes with it. A big thanks to member Tk59194 for his write up and sharing part numbers via PM(also Pwtr02ss for pointing me to Tk’s original write up). Took about an hour and a half. I could have done without the ice and saltwater dripping on my face though. But ‘‘tis the season in MI.

View attachment 234310 View attachment 234311 View attachment 234312 View attachment 234313

Would you mind sharing that info and the link? This is on my to-do list.


Sent from my iPhone using Tapatalk

 

[LT1ZOB]

Would you mind sharing that info and the link? This is on my to-do list.


Sent from my iPhone using Tapatalk

no problem. Here’s a link to Tk’s write up.
https://www.tahoeyukonforum.com/threads/tow-hook-fog-light-fascia.109453/
If you get stuck, feel free to reach out to me.

 

[akbrener]

I didnt do the work, but after 2 weeks waiting on a Front lamp X1 connector under the fuse box I have both low beams fuctional. they also replaced my oil cooler lines which were weeping a bit where the rubber hose is crimped. I guess its a common issue because they actually had those on hand at the dealership.

 

[kiwi]

Left my hippo at shop to change halogen lenses to Koito bi-led lenses.
I don't personally trust aftermarket led lamps in halogen sockets, so full retrofit is a proper way to go.
Should dramatically improve my lows and add second highs.
Also will swap hb3 to hir1 lamps in highs and install 1500lm led backlights

 

[K2 Kaiju]

Last free dealer oil change/rotation, and they did the brake recall at the same time. Just a 15 min reflash. Got home and installed this...

Sent from my SM-G975U using Tapatalk