What did you do to your NBS GMT800 Tahoe/Yukon Today?

[mals]

Today was all about lighting.

• Installed new 4300k HID low beams and replaced the aged 35W ballasts with a new pair of 55W.
• Replaced the peeled amber bulbs in my front running/turn lights with natural amber bulbs after I blew all the flakes out of the housings
• Replaced the 8 mini-bulbs in the steering wheel controls
• Replaced the 11 mini-bulbs in the heating control unit
• Replaced the mini-bulbs and stepper motors in the gauge cluster
• Reflowed the solder on the surface mount resistors to restore dim PRND321 display to full brightness

Can't wait for my next night drive when I'll be able to see what buttons I am reaching for on the dash.

 

[Knope]

Just returned home from Gatlinburg, TN (roughly 350 mile trip). I think my steering position sensor may be on the fritz. Driving up and down the mountain in Auto 4WD and at fast speeds, the steering felt solid and reliable...maybe even sporty. Trying to drive on a flat, straight road at 65 mph is damn near impossible. Switching lanes made me think the steering wheel wasn't even controlling where the wheels went.

I think it became more noticeable after the steering felt so sporty because it has been sloppy before. This is turning into a never-ending quest to fix the steering, which pretty much has everything less than a year old aside from hubs and tie rods...no play when on the lift though.

 

[Goodinblack]

Vote for January 2017 Truck of the Month

http://www.tahoeyukonforum.com/threads/vote-for-january-2017-totm.88965/#post-1062647

 

[Newkon]

Preformed a 3 step correction on the Yukon today! I could have cut more but didn't know how deep the clear was and didn't want to cut too much. Came out great though and a lot of the scratches are gone!

 

[Countryboy07]

Looks great! Want to come to Indiana and do mine now? LOL

 

[jcevans7]

Preformed a 3 step correction on the Yukon today! I could have cut more but didn't know how deep the clear was and didn't want to cut too much. Came out great though and a lot of the scratches are gone!

View attachment 72716

View attachment 72717

View attachment 72718

View attachment 72719

Looks good. I'm sure it took all day

Sent from my SM-N910T using Tapatalk

 

[BeenChevy]

Today was all about lighting.

• Installed new 4300k HID low beams and replaced the aged 35W ballasts with a new pair of 55W.
• Replaced the peeled amber bulbs in my front running/turn lights with natural amber bulbs after I blew all the flakes out of the housings
• Replaced the 8 mini-bulbs in the steering wheel controls
• Replaced the 11 mini-bulbs in the heating control unit
• Replaced the mini-bulbs and stepper motors in the gauge cluster
• Reflowed the solder on the surface mount resistors to restore dim PRND321 display to full brightness

Can't wait for my next night drive when I'll be able to see what buttons I am reaching for on the dash.

Any pics of this? Could use a good write up on this one after going dim on the PRND321. As well the steering wheel ctrl, 4wd, 2hi. Can the mini-bulbs be ordered on ebay, amazon?

 

[Newkon]

Looks good. I'm sure it took all day

Sent from my SM-N910T using Tapatalk

It took practically all day! Around 6-7 hours.

 

[Newkon]

Looks great! Want to come to Indiana and do mine now? LOL

As long as you have a heated garage waiting for me! Haha it's too cold up there! It was 75 today in Florida

 

[mals]

Any pics of this? Could use a good write up on this one after going dim on the PRND321. As well the steering wheel ctrl, 4wd, 2hi. Can the mini-bulbs be ordered on ebay, amazon?

Sorry, no photos. I used write ups found here and elsewhere and watched a bunch of youtube videos before tackling it. Here are some of the most useful:

• Removal of Steering Buttons & Bulb Replacement
• Steering Wheel Accessory Button Reinstall made easy!
• AC control module (Replace Bulbs)
• How to repair GM Dim PRND321 and Speedometer cluster
• Fix for GM gauge cluster PNRD123 Light

All the bulbs and stepper motors were ordered from Amazon.