What did you do to your NBS GMT800 Tahoe/Yukon Today?

[Rocket Man]

Finished the bumper
View attachment 77631
Well not completely finished just need to spray the clear coat. No I didn't spray it outside I just moved it out so I could take a picture with my truck in it. I'll post the finish product in a few hours when I'm done and the clear coat is dry. Should I do a write up for the process or does everyone kinda know already what to do?

Good job, can't wait to see it installed.

 

[mwilson62000]

All cleaned up and new knock sensors in.

 

[mattbta]

Bought a few items off my Tahoe Stuff Amazon list: 2 Timken Wheel hubs, 2 Moog UCA's and 2 Moog lower ball joints. Hubs and BJ's will be here tomorrow but the UCA's won't arrive until Wednesday. Guess I'll put them in next weekend.

Less than 4 months ago, I replaced rotors/pads at all corners. When I saw that I'd be right in there to do ball joints/arms, decided to get the hubs too. No sense pulling that stuff a third time! Should have done it all at once when I did the brakes.

Now the only thing in that front end that won't have been replaced will be the gearbox, which I apparently need too. Maybe later...

 

[kwOH]

Quick question. How far in do the cross bars go on the esky rack all the way to the front? Like how far are they spaced apart?


Sent from iPhone 7 plus using Tapatalk Pro

 

[mattbta]

All cleaned up and new knock sensors in.

Nice! That's next on my list after this front end stuff.

 

[95escahoe]

View attachment 77639 All cleaned up and new knock sensors in.

Make sure to put rtv around the knock sensors like the TSB states


Sent from my iPhone using Tapatalk

 

[HiHoeSilver]

I figure they were same same. Might have to try the duplicolor.
You see the glow in dark plastidip?

Worst video and application ever. But have ideas

Hmmm...

 

[Rocket Man]

Got my new Corsa knock-off exhaust tip welded on by an exhaust shop.

 

[05alive]

Just bought the topside creeper. Well worth it!!

Want one so bad

 

[05Single]

Lookin clean on them 15s