What did you do to your NBS GMT800 Tahoe/Yukon Today?

[blueinkd]

I need to replace all the bump stops on mine. The fronts have completely disintegrated and the rear is are now crumbling apart as well. Where'd you buy these from? Have a link by any chance?

Will post the Amazon links when I get home. I think it was maybe $30 for all four.

 

[blueinkd]

I need to replace all the bump stops on mine. The fronts have completely disintegrated and the rear is are now crumbling apart as well. Where'd you buy these from? Have a link by any chance?

Fronts
Control Arm Bumper Front Lower 2pcs 15153958 for Cadillac Escalade Chevrolet Avalanche Silverado Sierra Tahoe GMC Savana Sierra Yukon Replaces 905-208 15039397 https://a.co/d/eOOaBGE

Rears

Autoacc Rear Bump Stops Axle Bumper Compatible with Chevy Tahoe Suburban Yukon 2000-2020, Avalanche 2002-2013, Escalade 2002-2020 (Pack of 2) https://a.co/d/3ogbBhe

 

[Pilot]

What’d I do to my GMT800?? I drove it 2,694.71 miles, from Palm Springs, California where it’s been in storage since the beginning of the pandemic back to New Jersey. That and my Yamaha (Star) Stryker.

Ready to start the mods again. I’ve ordered four new window motors + regulators, everything I’ll need for hydro boost conversion, 2020 Silverado calipers and Raybestos Element3 rotors, StopTech SS lines, new OEM water pump, Rigid Reflect UTV mirrors to replace the Dumbo ears..

What’s more, I recently started welding, so I’m planning to swap out my current Iron Cross bumper with a Move bumper kit.

 

[Pilot]

Oh I also ordered Recon taillights to replace these ****** Lumen lights that started failing after like 6 months

 

[Tonyrodz]

What’d I do to my GMT800?? I drove it 2,694.71 miles, from Palm Springs, California where it’s been in storage since the beginning of the pandemic back to New Jersey. That and my Yamaha (Star) Stryker.

Ready to start the mods again. I’ve ordered four new window motors + regulators, everything I’ll need for hydro boost conversion, 2020 Silverado calipers and Raybestos Element3 rotors, StopTech SS lines, new OEM water pump, Rigid Reflect UTV mirrors to replace the Dumbo ears..

What’s more, I recently started welding, so I’m planning to swap out my current Iron Cross bumper with a Move bumper kit.

View attachment 380814
View attachment 380815
View attachment 380816
View attachment 380817

Good to see you back! I bet that was a great road trip. How long did it take you?

 

[Pilot]

Good to see you back!

Thanks! Good to see you!

 

[HansJr]

They were maybe 2/16 away from touching the control arm. I'm thinking it made a huge difference in ride. I ordered Amazon units and seemed like good quality.

Link?

 

[Walchit]

Hoping this rust metal primer sticks good to the aluminum, I probably could have roughed it up better, but if it runs long enough for the paint to start peeling I will consider it a win, lol

 

[iamdub]

They were maybe 2/16 away from touching the control arm. I'm thinking it made a huge difference in ride. I ordered Amazon units and seemed like good quality.

1/8". They were maybe an eighth away from touching.

I tried to let it go when I saw it last night but had to set The Universe straight this morning cuz I'm fighting odd vibes due to an unforeseen event that took place on my way to the gas station an hour ago.

Whew! Moving on...

 

[Rocket Man]

1/8". They were maybe an eighth away from touching.

I tried to let it go when I saw it last night but had to set The Universe straight this morning cuz I'm fighting odd vibes due to an unforeseen event that took place on my way to the gas station an hour ago.

Whew! Moving on...

Haha. I worked in construction all my life and I don’t think I’ve ever heard someone say 2/16 in my life until I saw that post. Now, we did use the description of 1/16 minus or 3/16 plus when shooting lines with a transom, just because there aren’t 1/32” lines on a tape measure and the young generations don’t seem to even know what they are.

Now with that said, what was the unforeseen event?