Red_Raider
Full Access Member
Much needed wash and wax. Dipped the wheels too. I'll be picking up my hd hood later on.
What did you do to your NBS GMT800 Tahoe/Yukon Today?
- Thread starter vwbeaner
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
1SickVeilSideZ
Member
- Joined
- Jan 21, 2011
- Posts
- 63
- Reaction score
- 0
Installed my 2' McGaughy drop spindles and 3' Belltech rear springs. Last crappy cell phone pic I post, I plan on taking some good pics with my camera once the weather clears up and I get the truck cleaned up.
It currently sits on 26' DUB Autobahn Zane Edition Wheels. I've always loved MHT wheels since my older brother had them on his truck way back when.
More suspension work and brake upgrade coming soon.
---------- Post added at 02:37 AM ---------- Previous post was at 02:34 AM ----------
Didn't realize the pic was so small, I've seen people with bigger pics in there signatures lol!
It currently sits on 26' DUB Autobahn Zane Edition Wheels. I've always loved MHT wheels since my older brother had them on his truck way back when.
More suspension work and brake upgrade coming soon.
---------- Post added at 02:37 AM ---------- Previous post was at 02:34 AM ----------
Didn't realize the pic was so small, I've seen people with bigger pics in there signatures lol!
Mechahead
Member
Put most of the LED dome lights in. The bulbs for the map lights got back ordered two weeks. Really pleased with the light output.
Installed my 2' McGaughy drop spindles and 3' Belltech rear springs. Last crappy cell phone pic I post, I plan on taking some good pics with my camera once the weather clears up and I get the truck cleaned up.
It currently sits on 26' DUB Autobahn Zane Edition Wheels. I've always loved MHT wheels since my older brother had them on his truck way back when.
More suspension work and brake upgrade coming soon.
---------- Post added at 02:37 AM ---------- Previous post was at 02:34 AM ----------
Didn't realize the pic was so small, I've seen people with bigger pics in there signatures lol!
Such a tease!! lol
Looks good but definitely in for some better/bigger pics!
Blue2002Tahoe
Full Access Member
- Joined
- Jul 22, 2013
- Posts
- 313
- Reaction score
- 7
Wired the grill guard lights today, took longer than I expected though
Pachanga02
Full Access Member
Washed her up after being filthy, cleaned Eskys and put them away. Swapped on ck375s and drove to my daughters chorus concert. Great day.
scoobyxj
Full Access Member
- Joined
- Oct 24, 2013
- Posts
- 176
- Reaction score
- 3
Ran mine through the auto wash to get most of the salt off it. It's supposed to snow again Sat though so that won't last long... Bought new wipers all the way around, and some bulbs for the front parking lamps, and the front park/turn locations. Considered going LED but passed figuring I would have issues, and me not wanting to mess with it in the cold... Need to get farm mower put back together so I can get it in the garage and do some other mods I have planned..
Installed a new camera to plug into my backup monitor. Damn adhesive wouldn't stick bc of the cold and don't really want to put screws in my bumper. Going to break out the heat gun tomorrow and try again w 3m tape
Rivieraracing
Full Access Member
Yeah, get it warm and use some isopropanol alcohol to clean the mounting service. It will clean the area as well as dry up any moisture that's present, just be sure to follow the isopropanol with a dry rag to take off the residue left by the alcohol! 3M is some great stuff especially if you prep it well!
Similar threads
