What did you do to your NBS GMT800 Tahoe/Yukon Today?

[BADRIDES]

Master how-to mod list. The footwell thread is from gmfs. To this day probably the easiest mod I've done yet.

http://www.tahoeyukonforum.com/threads/how-to-master-list.2322/

Thanks for the mod list.

 

[mattbta]

Cleaned the TB and replaced the gasket. Idle still a tad rough after relearn. Looks like it is on to intake gaskets next...

 

[Rocket Man]

Cleaned the TB and replaced the gasket. Idle still a tad rough after relearn. Looks like it is on to intake gaskets next...

If you have the intake off you might want to do the knock sensors and harness, the valley cover gasket, and the oil pressure sending unit.

 

[mattbta]

If you have the intake off you might want to do the knock sensors and harness, the valley cover gasket, and the oil pressure sending unit.

Yes. Good advice. Those are all in my 'Tahoe Stuff' list on Amazon.

 

[jarydM]

White out on my bow ties. Reflective white vinyl wrap.

thanks @05Single for the hook up

the Vinyl is reflective, but my phone's flash isn't working :/

 

[jarydM]

That's when I was taking a break from this project.

 

[jarydM]

Got these things painted and put back on. Experimenting with spray on bed liner...hoping it holds up to the rock pecks a little better

This looks great! Was it just a shake can?

 

[MadDogDelpho]

Thinking of doing Z71-style color match for bumpers and grill. Any how-to suggestions for my storm gray '02?

 

[95escahoe]

If you have the intake off you might want to do the knock sensors and harness, the valley cover gasket, and the oil pressure sending unit.

New intake bolts too the TSB says not to reuse the bolts


Sent from my iPhone using Tapatalk

 

[Tonyrodz]

New intake bolts too the TSB says not to reuse the bolts


Sent from my iPhone using Tapatalk

Why? Lose they're strength?