That’s how I’m trying to look at it. Planned on buying a junk core and building it myself as a backup but the truck decided to create the junk core for meWelp at least when you're done it's one less thing to worry about
What did you do to your NBS GMT800 Tahoe/Yukon Today?
- Thread starter vwbeaner
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Replaced a couple of the steering wheel control switches with the Dorman ones from Rock Auto (the photo lighting is not great):
Easy enough to do these two: disconnect the negative battery cable, pop the airbag off and disconnect it, and use a small hooked pick to pull them out and release the connectors. Taking the airbag off gave me an opportunity to push the wires into the tunnels to help push the switches out of the cavity.
I put the old (OE) ones up for free in the For Sale section:
Easy enough to do these two: disconnect the negative battery cable, pop the airbag off and disconnect it, and use a small hooked pick to pull them out and release the connectors. Taking the airbag off gave me an opportunity to push the wires into the tunnels to help push the switches out of the cavity.
I put the old (OE) ones up for free in the For Sale section:
Keviebear86
Full Access Member
- Joined
- Apr 24, 2018
- Posts
- 210
- Reaction score
- 500
Finally got around to installing the Glenn's Auto Performance trans cooler kit. Definitely a big improvement over stock. Lines fit perfect. Cooler and brackets were all exactly the fitment I was hoping for.
ivin74
05 NBS Nali
W
No pics it didn't happen. Lol
Keviebear86
Full Access Member
- Joined
- Apr 24, 2018
- Posts
- 210
- Reaction score
- 500
This is the only photo I took. I actually removed the push bar. It's time to change the look of my Tahoe. I'm looking for projector retrofit headlights and a good front turn signal housing.
