What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[Just Fishing]

Did you take the seat out, or leave it in place?

I took the whole seat out and sat it on the ground next to the truck.

I left the seat belt in place, I just wanted more room.

One somewhat pits was unplugging the heater unit

I found it easier to remove the cushion and heater element from the seat completely.

Then I could freely glue the heater to the new foam, and install the cover.

 

[13UpInSmoke]

Little exhaust mod Ive been wanting to do

 

[Charlie207]

My K02s are looking pretty weather-cracked, and getting loud, so I just ordered four new tires: 275/60R20 Nokian Rotiiva AT from simpletire.com which were the same price as their eBay store, but their website offered a little military discount, so why not. I've run them on my Xterra and Armada and they're great. $770 all in.

 

[FasterBass]

Little exhaust mod Ive been wanting to do
View attachment 371770View attachment 371771View attachment 371772View attachment 371773

Nice work! looks killer

 

[89Suburban]

Ooo I found a cloth seat cover, cheap too!

Driver Bottom Cloth Seat Cover For 2007-2014 Chevy Silverado 1500 2500HD 3500HD | eBay

For Chevy Silverado 1500 2500HD 3500HD 2007-2014. For GMC Sierra 1500 2500HD 3500HD 2007-2014. For 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014. For Chevy, GMC Silverado, Sierra, Tahoe, Suburban, Avalanche, Yukon.

www.ebay.com

"This part is not compatible with this 2007 Chevrolet Tahoe LT Sport Utility 4-Door 5.3L 5328CC 325Cu. In. V8 FLEX OHV Naturally Aspirated."

 

[89Suburban]

GM OEM Front Seat-Back Cushion Foam Pad 15243902 | eBay

Part Number: 15243902. FOR SEATBELTS -MUST BE VERIFIED BY VIN LEFT=DRIVER SIDE, RIGHT=PASSENGER SIDE OF VEHICLE. THESE ARE GENERIC ILLUSTRATIONS OF WHERE PART MAY BE ON VEHICLE, NOT ACUTUAL PART.

www.ebay.com

PN: 15243902

I'm not forking out 150 bucks for that cushion but I DID confirm it is the same part number for both sides so I will be swapping it.

 

[89Suburban]

When I did mine I took the seat out. I think it is easier out of the truck.

I've done it multiple times in vehicle. Last time I did it was out of the vehicle. Is easier with it out and on a workbench.

 

[gooffeyguy]

Can anybody post a link to some good, easy to install, split loom tubing?

I was going to replace the ones that run along each side valve cover by the coil packs because mine are all brittle and breaking apart, but the loom I have is being a pain in the ass to put on. It must be old or cheap, or both.

I know it's been talked about on here before, but I'm being lazy right now and don't feel like searching, lol

 

[the_tool_man]

Little exhaust mod Ive been wanting to do
View attachment 371770View attachment 371771View attachment 371772View attachment 371773

That looks fantastic. When I found out the SLC exhaust was NLA (for 6.2L) I thought about having a custom dual tip fabbed, and having it exit through the bumper like that. But instead of a bezel, I would make a cutout in the lower edge of the bumper and have the tips recessed halfway into it, if that makes sense. I did a quick search for a pic. But I couldn't find one, probably because this detail is out of style now. It was really popular with customs in the 1980's. But I REALLY wanna do it.

 

[Just Fishing]

"This part is not compatible with this 2007 Chevrolet Tahoe LT Sport Utility 4-Door 5.3L 5328CC 325Cu. In. V8 FLEX OHV Naturally Aspirated."

Double check that elsewhere, I'm pretty sure the seats for the Silverado's are the same.
maybe just not that color, but who knows.