What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[gooffeyguy]

Ok I got a post here that is blocked and needs to be approved by a moderator for some reason.

Sounds like y'all got supporting member problems

 

[gooffeyguy]

Pulled the spare last night to make room for investigation, no evident marks on that. Of course now that that weight is off the back it isn't doing it today.

Maybe the spare was the problem

 

[89Suburban]

Sounds like y'all got supporting member problems

 

[Sparksalot]

Pulled the spare last night to make room for investigation, no evident marks on that. Of course now that that weight is off the back it isn't doing it today.

Where was the spare? In the cabin or left at home.

 

[89Suburban]

Where was the spare? In the cabin or left at home.

Winched up in the rear end undercarriage.

 

[kbuskill]

@iamdub @kbuskill @Doug118 @07Burb


halp muh


View attachment 429656View attachment 429657View attachment 429658View attachment 429659View attachment 429660

Did you install the offset endlinks for the rear sway bar and move the sway bar towards the passenger side?

If not, my guess is the sway bar is making contact with the panhard frame mount.

 

[Sparksalot]

Winched up in the rear end undercarriage.

I missed something about your weight removal then.

 

[89Suburban]

Did you install the offset endlinks for the rear sway bar and move the sway bar towards the passenger side?

If not, my guess is the sway bar is making contact with the panhard frame mount.

Not yet but I did not see any evidence that is happening.

 

[89Suburban]

I missed something about your weight removal then.

I usually keep the spare up under the rear frame. I took it off to make is easier to investigate what the schizzle is going on under there haha

 

[89Suburban]

Did you install the offset endlinks for the rear sway bar and move the sway bar towards the passenger side?

If not, my guess is the sway bar is making contact with the panhard frame mount.

I ordered the links and will see if that fixes it.