easiest is to look at the steering angle data on the scanner and see if it moves with the wheel.
a decent scanner to see all the modules in the trucks can be had for under 100$ these days. it's really worth having something as these age.
What did you do to your NNBS GMT900 Tahoe/Yukon Today?
- Thread starter phattyford
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
easiest is to look at the steering angle data on the scanner and see if it moves with the wheel.
a decent scanner to see all the modules in the trucks can be had for under 100$ these days. it's really worth having something as these age.
Grady_Wilson
Supporting Member
Also, my scan tool showed no codes for the suspension system so it really is just that steering angle sensor.
Grady_Wilson
Supporting Member
Boy, am I glad I will no longer need to worry about that nonsense when I am in Wyoming full time.
My Yukon is already registered in WY, it's my other cars that I will not need to worry about.
Zero smog tests and zero state inspections.
Last edited:
gooffeyguy
Tom
I purchased some of this McGuires Keep Clear spray I'm planning on trying on my lenses.
I have aftermarket one's I installed about 5 years ago that show some of the clear coat pealing off across the top. They're only $300 a set, so I'm either going to repair the clear on these ones or just buy new ones and then try that McGuires stuff on them.
I thought about buying those Morimotos, but looks like they might have UV problems with the lenses also.
never heard of the keep clear stuff. huh
yeah these are a bit expensive to not last a year before showing signs of getting eat up. the brand makes a tons of light for cars and trucks and is considered not the ebay stuff even thou I'm sure it's all China made. I expected better. we'll see how the new ones do.
when I bought a weather tech mat for the back I tossed these ppf in the cart just never got around to installing them. I think I'll put them on before replacing the lights and see if it helps with the uv.
www.weathertech.com
yeah these are a bit expensive to not last a year before showing signs of getting eat up. the brand makes a tons of light for cars and trucks and is considered not the ebay stuff even thou I'm sure it's all China made. I expected better. we'll see how the new ones do.
when I bought a weather tech mat for the back I tossed these ppf in the cart just never got around to installing them. I think I'll put them on before replacing the lights and see if it helps with the uv.
Headlight Protection Film Kits for Your Vehicle - LampGard | WeatherTech
Protect your vehicle’s headlights from discoloration, scratches, cracks and more with ready to install headlight protection film kits from WeatherTech.
www.weathertech.com
Geoffsfas10
Full Access Member
Beginning the prep for round 2 of driving to the Gulf coast this year. So lot of general maintenance stuff.
Grady_Wilson
Supporting Member
I was just about to change the oil but I ordered a Fumoto valve so I will have to wait until that comes in.
I did check the air filter and took a general look around under the hood.
My steering position sensor should be here any time now so I can get to doing that.
I did check the air filter and took a general look around under the hood.
My steering position sensor should be here any time now so I can get to doing that.
Tonyrodz
Resident Resident
This is the uv protector I used in my business. You mix a cap full each of the 2 small bottles. It's enough to do 1 set of headlights. You apply with a lint free towel. I gave a 1 yr guarantee on yellowing. Never got a call back. I actually used it on my aftermarket headlights on my Tahoe about 6-7 yrs ago and they still look good.never heard of the keep clear stuff. huh
yeah these are a bit expensive to not last a year before showing signs of getting eat up. the brand makes a tons of light for cars and trucks and is considered not the ebay stuff even thou I'm sure it's all China made. I expected better. we'll see how the new ones do.
when I bought a weather tech mat for the back I tossed these ppf in the cart just never got around to installing them. I think I'll put them on before replacing the lights and see if it helps with the uv.
Headlight Protection Film Kits for Your Vehicle - LampGard | WeatherTech
Protect your vehicle’s headlights from discoloration, scratches, cracks and more with ready to install headlight protection film kits from WeatherTech.
If your headlights aren't new, you'd need to restore them 1st before applying it.
so the first kit is the refeb stuff and the 45$ is the uv sealer?
lights showed up today, they would be fresh out of the box.
Tonyrodz
Resident Resident
Sorry I was a little confusing on my explanation. The large bottle is used 1st to clean as much of the yellowing off the headlights as possible, you then sand with different grits of sand paper with a palm sander, then buff with some plastic polish using a power buffer. After all that you then mix a bottle cap of each 4 Oz bottle--Clear Wipe and Clear Slicker--in a small cup, which you then apply on the lenses with a lintless cloth/towel being careful leaving no drops. Let it dry a few hours and they'll be good for a few years. Of course if you're doing new lights, you'll just need to mix the cap fulls and take it from there.
