I must need a longer cheater bar. I’ve only broken 2 HF adapters.
What did you do to your NNBS GMT900 Tahoe/Yukon Today?
- Thread starter phattyford
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
mikez71
Full Access Member
- Joined
- Mar 9, 2023
- Posts
- 1,620
- Reaction score
- 1,894
come too think of it, my sears 1/2" cheater cracked off on one side supporting the bit.. Can't remember if they warrantied it, but I have another craftsman in the toolbox..
Tonyrodz
Resident Resident
They should've warrantied it, that's the only good thing about Craftsman.
I've had Craftsman tools warrantied at Lowe's. Last was a 1/4" ratchet.
mountie
Supporting Member
I always wondered about Craftsman...... Some other company bought that name..... I wasn't sure of the quality after Sears shut down.
the craftsmans line went to crap long before the name was sold off. big difference between vintage craftsman and the later stuff. there's a market for the old stuff if you have it. the newer stuff wasn't made as well.) it's noticeable side by side.
the new stuff as Lowes to me falls between the 2, bit as good as the og pre 90s ish tools better than the end of the line as sears.
I have a set of their 3/8 impact sockets, feel better than Harbor freight, which isn't that bad these days. I've had them on a 1/2in impact going to town and no worse for wear. like everything thou it's a hogpoge of rebranded stuff. there's no one factory making any brand of tool anymore, it's just what the sales rep has decided for you is good for their brand/profit. so if you see something that is good, try it. if you see something else with the name on it that seems like cheap junk. it probably is.
I feel like gear wrench branded tools are a very good middle of the road cost vs quality.
the new stuff as Lowes to me falls between the 2, bit as good as the og pre 90s ish tools better than the end of the line as sears.
I have a set of their 3/8 impact sockets, feel better than Harbor freight, which isn't that bad these days. I've had them on a 1/2in impact going to town and no worse for wear. like everything thou it's a hogpoge of rebranded stuff. there's no one factory making any brand of tool anymore, it's just what the sales rep has decided for you is good for their brand/profit. so if you see something that is good, try it. if you see something else with the name on it that seems like cheap junk. it probably is.
I feel like gear wrench branded tools are a very good middle of the road cost vs quality.
FWIW Sears never manufactured Craftsman tools -- it was always done through a contract with an outside manufacturer. "Stanley Black & Decker" owns the brand and has had the naming rights for 7 or 8 years now.
