What did you do to your OBS GMT400 Tahoe/Yukon Today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

retorq

Full Access Member
Joined
Mar 4, 2010
Posts
3,018
Reaction score
10
Location
Kingman AZ
yikes... have fun lol

It's actually not that bad. The hard part was cutting the carpet and positioning around that heat/AC duct for the rear. I didn't realize it was right there ... that's what those 1 inch spacers are for.
 

bowtiefreak

No Quarter
Supporting Member
Joined
Apr 30, 2009
Posts
5,404
Reaction score
99
Location
Near Philly
tightend up the steering in the tahoe and mounted my spare 35" tire in the back of the suburban.
 

vtx1800sba

Full Access Member
Joined
Jun 4, 2011
Posts
222
Reaction score
2
Location
Michigan
Changed out 7 of 8 plugs in mine today. Couldn't fit my extension, etc. past the dip stick tube. ******! Will have to do it at the shop tomorrow. I can't believe the Hoe even ran. Original plugs at 15 years old. The electrodes were all but gone (even at 53k miles). Put Bosch platinums in.
 

bowtiefreak

No Quarter
Supporting Member
Joined
Apr 30, 2009
Posts
5,404
Reaction score
99
Location
Near Philly
How did your tire mount come out? I know you were pondering how to do it for a bit.

I thought about it too much...without ever looking at it. The standard mounting hook needs to be a few inches longer but I put a 3" S hook in there and a link and all the stock hanger harware worked just fine. had to pull the lower tire mounting guide out since it works for a 245/70/16, not a 35x12.5" It was a tight fit. I got in there and pushed it into the origonal mount area and it just fit.
 

retorq

Full Access Member
Joined
Mar 4, 2010
Posts
3,018
Reaction score
10
Location
Kingman AZ
It's actually not that bad. The hard part was cutting the carpet and positioning around that heat/AC duct for the rear. I didn't realize it was right there ... that's what those 1 inch spacers are for.

299720_2433708755918_1047634090_2789343_384042614_n.jpg


Used a skull shift knob instead of the T handle...

390786_2433710275956_1047634090_2789345_1611794977_n.jpg
 

Sp1nn3y

Full Access Member
Joined
Sep 2, 2011
Posts
144
Reaction score
2
Location
North West Georgia
painted the grill, undercoated above the tires, used bedliner on as many spots as possible :D

Tomorrow i try to paint the wheels one by one without any jack stands, wooh!

[ill post pics tomorrow of grille, looks sexxy]
 

Forum statistics

Threads
131,412
Posts
1,850,611
Members
95,506
Latest member
MRBJU52

Latest posts

Top