Search results

  1. R

    A little installation guidance. DDIN, Subs and Amp

    I got it all in, now I'm just trying to figure out how to get the turn signal noise to not be so loud.
  2. R

    A little installation guidance. DDIN, Subs and Amp

    After a ton of searching I think I figured it out. It has a single wire subwoofer preout, which I've never ran across before. I figured it was JVC's way of trying to get you to buy their amps. They even made the plug green, and the manual shows one rca connecting to a JVC amp. Apparently...
  3. R

    A little installation guidance. DDIN, Subs and Amp

    I've been working on a friend's 07 Avalanche. Putting in a JVC ddin head unit, 2 12" alpine type r subs, and an alpine amp. I have done plenty of stereo installs, but its been a few years and things have changed. Tomorrow all I got to do to finish up is run the remote and rca's. He has...
  4. R

    P0120, p0220, p1516, p2101

    I've searched the forum but surprisingly came up with nothing on this. Out of nowhere today, the Reduced Engine Power came up along with check engine and trac. control disabled. I made it to Advanced to check the codes and got back 4 codes- P0120, P0220, P1516, P2101. I found a little just...
  5. R

    Service Tire Monitor - New Problem

    It's been a while since I've done it, but are you starting at the passenger front? I think it goes pf, pr, dr, df. If you're starting on the passenger front and it's not giving you confirmation, its possible that one is bad. When I did mine, I made it all the way around to the driver front...
  6. R

    04 Yukon XL 2nd row bench

    I didn't want to thread jack the other thread, and what I'm looking for is a little different. I am wanting to buy a second row 60/40 bench seat for my Yukon. I need another seat for vacations so the whole family can ride. I plan on just swapping it out as needed once or twice a year, so I'm...
  7. R

    Looking for an HD hood for a decent price

    I was looking for one for my wife's Yukon and I called a local salvage yard. They didn't have a used, but said they could order me a new aftermarket hd hood for $150. Didn't ask if it was capa certified. My wife's uncle owns a body shop and he told me to make sure it was capa certified, but...
  8. R

    Steering Shaft current thoughts

    Add 8, 14MM flat washers to each nut and bolt head. I was getting a popping noise on takeoff or while turning, going into the driveway, over speed bumps, stuff like that. I used to have the service bullitin saved but I got rid of it when I fixed the problem. If you go to the dealer, they sell...
  9. R

    Average MPG

    I haven't really noticed a big change in what the DIC says i'm averaging, but I've noticed a big drop in the range in the past few months. I've only had my Yukon for about 9 months and when I got it, with a full tank on the way home from the dealer my range was showing over 500 miles to empty...
  10. R

    Steering Shaft current thoughts

    Can't go wrong with the Dorman replacement from Summit for $45. I got it and installed it with no problems, however my noise was coming from the crossmember. Another easy fix for about $2 worth of washers.
  11. R

    No rear heat

    I noticed I had this problem the day after I bought mine, which happened to be in the summer. But the dealer fixed it. There can actually be one of two parts go out or both. The blend door actuator is the cheapest and easiest to get to. You can have someone move the temp knob back and forth...
  12. R

    Getting ready to order grill, need opinions

    For now, I plan on doing a Street Scene roll pan, 24s this summer, and a bigger tv. It's actually my wife's daily, but we have 3 kids and 1 more coming in late feb. so I gotta play a little mild. Plus I'm building my car up too, so it's going to be a slow process unless I hit the lotto.
  13. R

    Getting ready to order grill, need opinions

    Installed the new grille last night. Looks great, but it's been pissin and pourin all day so no pics yet. My only complaint on the street scene speed grill is it probably cost them next to nothin to make, and then they sell it to us for $165. I probably could have got it a little cheaper, but...
  14. R

    The worst thing about owning a Yukon XL

    Is it just me or can people just not help hitting their doors on my Yukon? For some reason the passenger side over the rear wheel is the worst. If it keeps up, its going to look like I ran it down a guard rail. I badly want to remove the door moulding, but I can't. I even take the extra time...
  15. R

    Getting ready to order grill, need opinions

    Thanks for the info. I wouldn't be worried if I had a suburban, but the yukon grill is so much bigger and I have seen a lot of cheap bolt over grills on other gmc's around here and it just bugs me to see the stock grill through the other. I ordered a polished stainless and was hoping it would...
  16. R

    Getting ready to order grill, need opinions

    I'm getting ready to order a new grill for my 04 Yukon. I think I'm going with the street scene speed grill. It says its a clip on installation which kinda worries me. I love how this grill looks, but I don't want a grill that you can see the stock grille thru it. I know a lot of people have...
  17. R

    Major trouble with plug and wire replacement

    It's ok, let it out. Feels better don't it.
  18. R

    Major trouble with plug and wire replacement

    our autozone's service around here is terrible. its not necessarilly the stuff they sale thats bad its the people that work there. there's 3 of them here and i don't care for any of them. most of them here aren't very friendly or as knowledgeable as they think they are Got a set of MSD...
  19. R

    Major trouble with plug and wire replacement

    Yesterday I picked up a set of new plugs. My fuel mileage has been slowly slipping away so I figured I'd give replacing them a shot. I got a set of NGK V-Powers and gapped at .040. The plugs I removed looked to be the original, NGK AC Delco G-Power's I believe? Most of them had a gap in the...
  20. R

    Crossmember fix

    Just got done adding washers to the crossmember. I tried to get the washers listed on the tsb but none of the dealers had any in stock and they were $1.50 ea (needs 8). Just went to Fastenal and picked up 8 14mm i.d. washers for about $1.40. As far as the tsb goes, it says to remove the...
  21. R

    Crossmember fix

    Already checked those. The service bullitin describes my problem exactly. (" Some customers may comment on a snap or popping-type noise coming from the front of the vehicle. This condition is most apparent during hard left or right turns at low speeds. Going over bumps while turning may also...
  22. R

    Crossmember fix

    I am a new member and I've owned my Yukon XL for about 7 months. Sorry if this is a repost, which I'm sure it probably is, but my search didn't turn up what I was looking for. Anyways, I guess since I've owned it I've had a small pop in the front suspension when turning forwards/reverse...

Forum statistics

Threads
131,397
Posts
1,850,322
Members
95,490
Latest member
rnfernandez1968

Latest posts

Top