Search results

  1. S

    air ride kits?

    What he said. DJM makes a kit to push the sway bar an inch or two to the side. It's a must have if you're dropping hella low or doing air without cutting your truck to shit.
  2. S

    Goodies arrived

    I went from a basic 2/3 drop with keys, coils and extenders to an "older" ART kit and it was just hella bouncy. I did have adjustable shocks up front and played with several different combinations of shocks in the back but could never find the sweet spot. The newer Ride Tech stuff that you have...
  3. S

    Goodies arrived

    I'll take some when I get it back. The rear half of the frame is gone, with a new one in it's place. Triangulated 4 link and narrowed rear end in rear and tubular arms, custom bag mounts, relocated arm mounts, and some trick steering linkages in front. Plenty of work!!! I'll start a thread...
  4. S

    Goodies arrived

    The only problem that I could see with spindles and shockwaves is that the front will be much lower than the back. Also, You'll have to ride with a lot of PSI in order to get a good driving height. I wasn't happy with the ride at all, but that's all relative. After cutting the absolute shit out...
  5. S

    Goodies arrived

    Just to give you an idea of how it'll look, here's a pic of my old setup. ART shockwaves in the front with the Coolride in the rear, along with the free-travel mod. Tires are 285/40/22 And now...
  6. S

    what do ya guys think of this steering wheel?

    I have the Throttle wheel in Black. I also have smoothed and painted plastics, although the truck is still in pieces and the wheel is still in the box. Looks pretty good in person...
  7. S

    Tahoe to NBS Silverado HD front clip conversion???

    Old Pic with 22s and ART Shockwaves... Newer pic... You have to change the hood, fenders, bumper, grille, bumper brackets, and all hardware. You keep the factory core support and radiator. There's a little cutting involved but nothing too major, just the old frame horns for the front...
  8. S

    Your Other Ride Thread

    The 06 Harley Street Glide The 2006 Infiniti G35 Sedan Wifey's Daily 2004 BMW 745Li The 2000 Tahoe-Should be ready by Spring
  9. S

    my truck (56k no no)

    Driving and all?!? Badass! Do you have any toe issues from full drop to full lift? I'm trying to figure a how to correct that on mine... Got any ride height pics? I would love to see that thing smashing down the highway!
  10. S

    Help!! Draw drains bat every night think its factory amp

    I had the same problem with my factory amp. Even long after I stopped using it and ran everything in the truck off of aftermarket amps, the factory amp was still in the stock location and plugged in. I had a hell of a time tracing it down, but ultimately, that was the problem. Just unplug it if...
  11. S

    Installed heim tie rods today...

    Word. I am still trying to figure mine out and it's got a similar heim end on the spindle now, just with a standard threaded inner. When my Tahoe is laid out, the tow is NASTY. Maybe this will be the answer. I'll keep everyone posted if anyone cares...
  12. S

    rear bagged with pics

    What's up big homie! Mine is a one-piece driveshaft and I <think> I may have the problem narrowed down to needing it shortened just a hair. I'll keep everyone updated. I was trying to hold off on pics until it gets painted and the interior back in. It's just on some Escalade 18s now but...
  13. S

    rear bagged with pics

    Any luck yet?
  14. S

    rear bagged with pics

    I'm having the same problem with the rear end on my Tahoe. I haven't posted any pics yet because it's about to go to the paint shop, but it lays frame front and back. When I air it up to drive and virtually any height, I get the same honk/squeak that Grocery Getter is talking about. It also...
  15. S

    White on White - Complete Interior Swap

    Nice interior! BTW Boss, What running boards do you have? Those look pretty good.
  16. S

    3/5 Drop and my Escalade is STILL skying?!?

    Looks about right. The rear should settle some. After a little while you'll notice.
  17. S

    28" What offset do I need?

    What he said:beer:
  18. S

    Front clip swap

    The mounting points are all pretty much the same for the body panels. You will need all of the sheet metal, the headlight "buckets", of course all lighting... The front bumper requires different mounting brackets. You'll need to cut the old frame horns off and drill and bolt on the new ones...
  19. S

    esky third brake light on tahoe

    Hmmm, I always thought you had to replace the glass. That's what I did anyways and it was no big deal. Just heavy as shit but...
  20. S

    Has anyone installed a SUBURBAN/YUKON XL '3rd Row' seat into a Tahoe/Yukon?

    I've got a full set of brackets for a 3rd row setup that I'm not going to use because the floor of the tahoe is cut out right now! Know of any takers?
  21. S

    looking for photos amp rack under reat seat

    Great amps! I still have a few laying around and another powering 3 subs in my garage.
  22. S

    pics of da 30zzzzz

    They def. have the wow factor!
  23. S

    DJM LCA Question...

    It's been about 6 months so I don't remember exactly who, but I did call at least 4 or 5 times! Maybe Tim? Either way, do you have any insight to this? It's on a 00 NBS Tahoe. Never wrecked, cut up (yet) or seriously modded. Torsion bars are stock from this truck and have around 30k on them in a...
  24. S

    DJM LCA Question...

    If I recall correctly, the UCA and LCA combo will also tweak the ball joints just a little to sit a bit more level at a lowered height. On a side note, I've had nothing but HELL with my DJM uppers and lowers. The torsion holes aren't "indexed" right so my truck is either WAY too high or so low...
  25. S

    03' Yukon Body Drop

    Yeah, I'm interested in the S-10 body mount situation.

Forum statistics

Threads
131,414
Posts
1,850,698
Members
95,509
Latest member
HIGHHOPES

Latest posts

Top