6.2 swap thread

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

randeez

Full Access Member
Joined
Sep 29, 2017
Posts
7,444
Reaction score
23,679
Location
south florida
what IAT sensor you going to be using?

i grabbed an LS9 hoping its a little more responsive than the old LT1/vortec ones, uses a weird 12mm or 14mm thread tho
 
OP
OP
L

ls1frc

Full Access Member
Joined
Aug 10, 2019
Posts
923
Reaction score
1,350
Flex fuel sensor ordered and OTW.

Likely last two mods I do to this thing. After this, it's just fixing the paint, taking care of the rust as best I can and whatever else comes up.

I had plans to possibly do a blower, but its fast enough for me N/A considering the size of the vehicle. I'll save that money for a 2nd, fun car.
 
OP
OP
L

ls1frc

Full Access Member
Joined
Aug 10, 2019
Posts
923
Reaction score
1,350
I use it to fix the lean hot restart issue with cammed vehicles.

When your truck is fully up to temp, and you park it for 10 minutes, when you go to start it the IAT is cooked and reading way higher than the real air going in. The ECU then compensates, thinking the air is not as dense, and pulls fueling making you go way lean. On a stock cam, no big deal really. On a cammed car, it leads to a shit idle for a few minutes until air starts moving over the IAT and gets the fueling back in line.

So I relocate mine to somewhere in the airbox.
 

Speck

Full Access Member
Joined
Feb 25, 2012
Posts
324
Reaction score
82
Location
Olympia, WA
Just read the whole thread, and all I can say is Wow! Very nice job on the build! I'll be following this for when I get ready to do engine work on my L92. :cheers:
 
OP
OP
L

ls1frc

Full Access Member
Joined
Aug 10, 2019
Posts
923
Reaction score
1,350
Just read the whole thread, and all I can say is Wow! Very nice job on the build! I'll be following this for when I get ready to do engine work on my L92. :cheers:

Already got the good engine then. VVT cam and headers and have fun with your extra 100 hp lol.
 
OP
OP
L

ls1frc

Full Access Member
Joined
Aug 10, 2019
Posts
923
Reaction score
1,350
Cold start "clack" only had about 2 clacks before it quieted right down. I am gonna give it another tank of gas. If still doing it, I'll contact Johnson.

Drove a good 100 miles today. The 6.2 is amazing...
 

Forum statistics

Threads
132,380
Posts
1,867,078
Members
97,017
Latest member
97ext
Top