DENALI FRONT BUMPER TO SLT? Can this be done?

[MSanchez]

Hello Everybody, and For most of you this may be a No-Brainer, but I'm very New in this.
I got a 06 Yukon XL SLT and I will like to "copycat" the front bumper of the Denali 06. You think that I should buy it from a Dealer,? if so, that I will need special brackets or Hardware to make the change? Hard or Easy to do.
Will be Thank Full for the inputs.


THIS PROJECT IS COMPLETE!!!!!!! PICTURES WITH THE FINAL MOD ARE IN PAGE 3 OF THIS THREAD.

 

[carcrz]

yes it can be done, 2 ways you can do it buy the entire bumper hardware or just buy the cover and make it fit which consist of a little trimming of your bumper,i have done thios and is not hard here is a pic, let me know if you got more questions


---------- Post added at 07:17 PM ---------- Previous post was at 07:16 PM ----------

 

[1lowhoe04]

thats a sick yukon

 

[MSanchez]

Thank You CARCRZ, ........ If I decide to do just the Cover, when purchase will come with hardware or will use my existing one?

 

[carcrz]

Thank You CARCRZ, ........ If I decide to do just the Cover, when purchase will come with hardware or will use my existing one?

when you buy the cover thats all you going to get no hardware, but you dont need none all you will need is to trim your bumper and 4 screws to screw the cover to your bumper and thats about it its real simple.

 

[gdddup]

when you buy the cover thats all you going to get no hardware, but you dont need none all you will need is to trim your bumper and 4 screws to screw the cover to your bumper and thats about it its real simple.

do you have any picks of this install?

 

[carcrz]

do you have any picks of this install?

no i don't, they got lost on my old pc, but when ever you ready let me know and i can help you. maybe i can e-mail you some instructions or something to guide you thru it

 

[gdddup]

so unlike what the other threads ive been reading. all i need it to mod the denali bumper to fit over my stock bumper. and i dont need all the brackets n crap

 

[carcrz]

so unlike what the other threads ive been reading. all i need it to mod the denali bumper to fit over my stock bumper. and i dont need all the brackets n crap

you will need to modify your factory bumper to fit the denali cover. but no, you dont need all the hardware. no unless you want to do it like oem. but i went the cheap way out and just trim the oem bumper. and it looks and works just fine

 

[fire730]

Looks good carcrz

MSanchez - Plus the grill since it is different than the regular Yukon.