Get a catch can before any mods.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

justinesky

Full Access Member
Joined
Mar 9, 2015
Posts
183
Reaction score
48
Put on my airaid intake tube and took a picture of the crap in my intake of my 09 Yukon Denali 6.2. Tips for cleaning? Already installed a catch can, my first mod! There is some smoke in there so hard to see it all with my crappy cell pic, but oil on the bottom with some tan **** bomb on top.

I was wondering this as well but i can not find anything about this anywhere.
 

RotaryMachineRx

Full Access Member
Joined
Sep 2, 2014
Posts
106
Reaction score
1
Location
Saskatoon, SK
So I popped my engine cover off and had a look at installing this catch can. Before I do so I have a quick question. The existing stock hose running from the back of the valve cover to the top of the manifold is a hard black plastic and seems to be smaller diameter hose than the stuff provided with the catch can (maybe the ID is the same but OD is definitely smaller).

My question for you guys who have installed this, did you just pull this harder stock hose off of the fittings on the manifold and valve cover and fit the new hose directly to this fittings or did you have to replace the fittings themselves too? I was pulling on the hose on top of the manifold in attempts to wiggle it off but I felt like if I pulled to hard I was going to break the plastic fitting connected to the manifold and really be hooped. Any comments or suggestions? Do I just pull the stock hose off from these two fittings and slide the new hose on in their place?
 

CHOO CHOO

BackPagePhil
Joined
Feb 21, 2011
Posts
12,787
Reaction score
5,032
Location
Manheim, Pa
I Just used the stock fittings. Shouldn't be that hard that you would break fittings

---------- Post added at 10:52 AM ---------- Previous post was at 10:51 AM ----------

You didnt twist the fitting did you? It should twist off if i recall correctly.

---------- Post added at 10:55 AM ---------- Previous post was at 10:52 AM ----------

45a71fd886371bcf6aca3922dcca16cb.jpg
 

RotaryMachineRx

Full Access Member
Joined
Sep 2, 2014
Posts
106
Reaction score
1
Location
Saskatoon, SK
Yeah I didn't get overzealous with it, just took a quick glance at it and fumbled around with it.... I'll try prying the hose off; don't think there should be any need to remove the fitting itself if not required.
 

Yuko04

"SquareBODluvr"
Joined
Aug 13, 2010
Posts
6,819
Reaction score
1,608
Location
MN
My trip to Kansas and Missouri.
1400 miles and just emptied this yummy slop.....
8f587ed177d84ea942268464963e4bc1.jpg


Jiggy-J
 

Forum statistics

Threads
132,411
Posts
1,867,624
Members
97,072
Latest member
trav02nj

Latest posts

Top