iamdub
Full Access Member
Easy, Tony! He said he'd get it done.
Randeez 2012 Budget Yukon Denali Build (stick on hood scoops galore)
- Thread starter randeez
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Easy, Tony! He said he'd get it done.
OP
OP
randeez
Full Access Member
You know it
Also my daily pos is making some noise from rear...tires or wheel bearings or something. If they aren't busy I'm hoping to figure out which
Also my daily pos is making some noise from rear...tires or wheel bearings or something. If they aren't busy I'm hoping to figure out which
OP
OP
randeez
Full Access Member
OP
OP
randeez
Full Access Member
Will find out how slick I be. Made up hose to go to future chiller, but it should also work to loop the system for now so I can check for leaks and flow of this pump n stuff
Removed the air to air intercooler, recounted the tru cool 40k in its natural habitat, need to replumb tomorrow
dude wiff'd on the bung for the water pump also... i couldnt find a 16an to 16an oring union so i just threw an oring on an oring to an fitting which would work fine except it threads into a stopping point, which i clocked and marked for him but some one messed up. so will grab a female/female 16an union or something- will space the pump out a little further from the tank but thats no big deal
Removed the air to air intercooler, recounted the tru cool 40k in its natural habitat, need to replumb tomorrow
dude wiff'd on the bung for the water pump also... i couldnt find a 16an to 16an oring union so i just threw an oring on an oring to an fitting which would work fine except it threads into a stopping point, which i clocked and marked for him but some one messed up. so will grab a female/female 16an union or something- will space the pump out a little further from the tank but thats no big deal
Last edited:
Sam Harris
Supporting Member
Hell yeah Brother!
OP
OP
randeez
Full Access Member
put some water in it last night, going to leak without the oring fittings completely tight, prob wont be able to order or pickup a 16an to 16an union till next week so not gonna be doing much.
going to bend up some tubing for the tranny cooler since it will hopefully not move for a while.
need to add a relay for the intercooler pump and wire in the new temp sensor.
and big fuel pump is just constantly on for whatever reason so i need to trouble shoot that also, thinking the hobbs switch is shot out or trigger wire is touching ground somewhere
going to bend up some tubing for the tranny cooler since it will hopefully not move for a while.
need to add a relay for the intercooler pump and wire in the new temp sensor.
and big fuel pump is just constantly on for whatever reason so i need to trouble shoot that also, thinking the hobbs switch is shot out or trigger wire is touching ground somewhere
have you figured out about how many horsies you got there now?
OP
OP
randeez
Full Access Member
My goal was 300hp
