rolfsent
Full Access Member
A/C stopped blowing cold today. Found out it was the condenser and had it replaced.
What did you do to your OBS GMT400 Tahoe/Yukon Today?
- Thread starter 96ProCompTahoe
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
SunlitComet
OBS Jedi-Do Good
sprung a leak?
Gzes
the drifting 2dr
Still waiting on busy to finish ac.. he's been having a problem with the orfice tube. Looks like the line is a little bent so the tube won't fit. Broke an expensive one I bought too..
SunlitComet
OBS Jedi-Do Good
noJeepshere
Full Access Member
Broke the front diff offroad today. No matter though, my axle swap is planned in a few weeks anyways.
cent frum a smaert fone
cent frum a smaert fone
SunlitComet
OBS Jedi-Do Good
We need full photo documentation of this incident for your post to be worthy.
noJeepshere
Full Access Member
Nothing to see atm, it's all internal right now, but when I get it open in the next few weeks after the swap is done I'll crack open the diff and see what's what.
cent frum a smaert fone
cent frum a smaert fone
Been working on the a/c system this week.
The lower connection on the condenser was seized and I ended up twisting the line on it and kinking it. Yay, new condenser and a/c line too. Good thing is parts for this turd are cheap and it seems to be holding a vacuum just fine. I'm into it for about $350 so far including the gauges and vac pump.
I forgot my only set of keys for my truck in my boss's truck, so I couldn't start it and put the r152 in. I'll do that tomorrow after I put the vacuum on it for an hour.
The lower connection on the condenser was seized and I ended up twisting the line on it and kinking it. Yay, new condenser and a/c line too. Good thing is parts for this turd are cheap and it seems to be holding a vacuum just fine. I'm into it for about $350 so far including the gauges and vac pump.
I forgot my only set of keys for my truck in my boss's truck, so I couldn't start it and put the r152 in. I'll do that tomorrow after I put the vacuum on it for an hour.
Gzes
the drifting 2dr
Hey that's what happened to my 2dr. Where the orfice tube goes it kinked so we had hell trying to get it to work ealrier. Broke 2 orfice tube but finally got it fixed and in and mostly bolted up
chaingun427
OBS Mad Scientist
A.c. systems suck. My buddy doesn't understand why I'm fighting so hard to leave the front clip together on my project lol.
On that front, I finally got the engine and transmission split, and I'm waiting for a clear day to start scrubbing them down. And recommendations for the nv4500 and np241 as far as a cleaner/mud remover so I can paint them?
On that front, I finally got the engine and transmission split, and I'm waiting for a clear day to start scrubbing them down. And recommendations for the nv4500 and np241 as far as a cleaner/mud remover so I can paint them?
Similar threads
