Search results

  1. big_b_in_PA

    03 Yukon SLT / Suggestions on performance please!!!!!

    I don't want to thread jack but, m3po if you were closer I'd take you up on trading wheels.
  2. big_b_in_PA

    anyone wanna trade?

    Damn! Too bad yours isn't neutral/tan color. I'd trade ya in a heartbeat. Good luck!
  3. big_b_in_PA

    2003 gmc denali awd

    Check all fuses relays ect. Sounds like the ECM is not getting juice. I had that problem with a car I once had, it took me a couple hours to figure it out.
  4. big_b_in_PA

    03 Yukon SLT / Suggestions on performance please!!!!!

    Gears are going to be your biggest noticeable upgrade. Other than that programming, cai, exhaust, if you haven't done that already.
  5. big_b_in_PA

    Need NBS factory jack and accessories

    Thanks but carcrz hooked me up.
  6. big_b_in_PA

    Need NBS factory jack and accessories

    PM sent. Thanks!
  7. big_b_in_PA

    Someone tried to steal my yukon

    I'd call it a lock cylinder. As for keying it alike you should talk to a locksmith, or your local dealer. As for being a diy job, if you can remove the door handle yourself, it shouldnt be too hard to remove the cylinder assembly. I'm assuming the alarm disarm ect is controlled inside the door...
  8. big_b_in_PA

    Need NBS factory jack and accessories

    Carcrz shoot me a number. Im not sure what they are worth, but if its going to cost a fortune to ship, all I'd really need is the handle that cranks the spare down and the lug wrench. So pretty much whatever you think the setup is worth + shipping.
  9. big_b_in_PA

    Need NBS factory jack and accessories

    Anyone?
  10. big_b_in_PA

    Speakers , Bose and I

    Bose systems run on 2 ohms. So whatever you replace your existing speakers with, make sure they are 2 ohm. I used infinitys in my fronts. They sound fine, but you will want to make an enclosure for them if theres not one there already. I just googled 2 ohm speakers and went from there. Good luck!
  11. big_b_in_PA

    Need NBS factory jack and accessories

    Hey guys, my 03 'nali came without the factory jack and accessories. I wasn't really worried about it until the wife decided we are taking a road trip in january. So I was hoping some of you guys with the bigger stereo systems, or anybody that has no use for those things would want to sell them...
  12. big_b_in_PA

    Managed to get the LPPs installed!

    MSD wires are pretty good, and I have seen them on amazon for a decent price. Shop around, Taylor wires are good as well but I have always used MSD equipment on my old projects. Just my $.02, take it as you will. Good luck!
  13. big_b_in_PA

    switches

    Do you have the memory buttons on the drivers door? If so set everything where you want it to be, and hold down the #1 button until you you hear the door chime. That should do it. If you dont have those switches, I have no idea how to set he memory. Good luck!
  14. big_b_in_PA

    Courtesy door lights

    Well I couldn't tell you what they were called, but courtesy door lights may work. Good luck!
  15. big_b_in_PA

    Courtesy door lights

    The lens or the bulb? I think the bulb is a 194 or equivalent. The lens can be found on eBay pretty easily.
  16. big_b_in_PA

    Trailer hitch wiring, Please help!!!

    You have to hard wire it to those wires in that bundle. You can find whatever you need at Wally world, but if you need questions answered, any decent autoparts store can help. Depending on what kit you get it will have the bracket you need for mounting as well. Good luck!
  17. big_b_in_PA

    Transfer Case - How do should I remove the top center nut?

    Try supporting your trans with a floor jack, and loosen the trans crossmember, then lower it down to gain access to the upper nut. If you already have tried that, then the stubby may be the way to go. Good luck!
  18. big_b_in_PA

    Door switch??

    Good call on the door switch. You can try the ford remedy and spray a little w-d in the striker opening and closing and opening your door a bunch of times to try to work the switch loose. Or take the door panel off and get to the latch assy. inside the door, maybe able to free it up that way...
  19. big_b_in_PA

    Better Questions and Opinions wanted

    What about using a smaller pulley on your alt? That should spin it faster with lower rpms. Also dual batteries will definitely help out, too. Someone already posted the link for that. Good luck with the project!
  20. big_b_in_PA

    Sunroof drains???

    Keep the pressure low and there shouldnt be a problem. You don't want to blow the line apart and have a whole new problem on your hands. Mine are rubber lines and I would imagine over time they get brittle, so take it easy and you shouldn't have a problem.
  21. big_b_in_PA

    Sunroof drains???

    Sorry it took so long to get an answer, but if you open your sunroof the whole way and poke your head up through, the drains are in either corner up front, and the side drains run down the b pillar. Pretty much right above your head along side of the sunroof track. You will have to pull you head...
  22. big_b_in_PA

    Removed my Magnaflow today.

    Thats what I was wondering.... maybe sell for a decent price?
  23. big_b_in_PA

    A/C problem

    The orifice tube filter is inside the A/C line, usually close to the condenser. That's something thats going to be professionaly fixed/replaced. As for the blend door, does the temperature of the air coming out of it go from hot to cool? Or does it stay more hot than cold, like when you turn off...
  24. big_b_in_PA

    A/C problem

    Possible blockage in orifice tube, or actuator/blend door sticking. You might want to take it back to where you had the work done originally. Good luck!
  25. big_b_in_PA

    Mileage

    Just sold a 99 Tahoe with 200,7xx miles, and bought an 03 Denali with 84,xxx miles.
View older results

Forum statistics

Threads
133,018
Posts
1,878,537
Members
97,978
Latest member
msu50000

Latest posts

Top