my problem is the opposite I can't keep the bastard cool enough, with a stock setup i run 200-220 in nothing flat, not even towing and even when it is somewhat cool out
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
That's more than likely because of the way you drive, LOL, plus what is somewhat cool where you're at, 90*my problem is the opposite I can't keep the bastard cool enough, with a stock setup i run 200-220 in nothing flat, not even towing and even when it is somewhat cool out
I eliminated the oem cooler on my suv, also live in TX and we get a light winter.Did you boys plumb your 40k inline with your radiator-cooler, or just eliminate the radiator loop all together?
That’s my problem, too. 200° is easily achieved with the stock “cooler”, and why I’m choosing to bypass it. I hit 223° the other day, and it was only 85° ambient. Hoping this will keep me in the 180° range while I drive it like a Corvettemy problem is the opposite I can't keep the bastard cool enough, with a stock setup i run 200-220 in nothing flat, not even towing and even when it is somewhat cool out
no thermal bypass on mine and even with the deep pan and tru cool on a typical 85-90deg day it will run 180, maybe as high as 190, winter anywhere from 120-165+ which is fine with meThat’s my problem, too. 200° is easily achieved with the stock “cooler”, and why I’m choosing to bypass it. I hit 223° the other day, and it was only 85° ambient. Hoping this will keep me in the 180° range while I drive it like a Corvette
Part of my issue is the 3.08’s, which means it’s downshifting every time I need the truck to do anything with gusto. I have a feeling 4.11’s are going to make me enjoy the truck a lot more.
it is exactly because of the way I drive, silverado does the same thing.That's more than likely because of the way you drive, LOL, plus what is somewhat cool where you're at, 90*
Water begins to evaporate more quickly around 150°F. Boiling point is obviously 212°F, but you’ll see steam much before this, even heating water on the stove.Just some more food for thought... Fluid temps that are too cool won't get rid of moister/water vapor.
Water boils at 212° at sea level.
Discuss.... lol