What did you do to your NBS GMT800 Tahoe/Yukon Today?

[TheAutumnWind]

I want to do this. Is it plug n play? Do I need larger than stock wheels? (I’m sure) can you just buy off the shelf calipers, and bolt them on?

Wheels 17" or bigger are fine iirc. Calipers with the brackets and pads and rotors that match. They bolt right up. They fill up a 20" wheel much better than stock

Edit here's mine excuse the disgustingly dirty wheel.

 

[TheAutumnWind]

This is my rf rotor. Pad only making half contact. Never seen that before


Sent from my iPhone using Tapatalk

Well that isn't right.

Ive seen worse lol. Buddy of mine installed pads backwards. Ive seen pads worn down to the rivets/backing plates...crazy sobs are on the road with us...scary af.

 

[Sam Harris]

Wheels 17" or bigger are fine iirc. Calipers with the brackets and pads and rotors that match. They bolt right up. They fill up a 20" wheel much better than stock

Edit here's mine excuse the disgustingly dirty wheel.

View attachment 226075 View attachment 226076 View attachment 226077

Thanks! Eventually I’ll upgrade the wheels. Until then, I’ll be stuck with NBS..

 

[dszx13]

Well that isn't right.

Ive seen worse lol. Buddy of mine installed pads backwards. Ive seen pads worn down to the rivets/backing plates...crazy sobs are on the road with us...scary af.

These are getting close to the rivets. It’s been needing tlc for awhile now. I work on everyone else’s and put mine off until I absolutely have too. But half contact is a first for me


Sent from my iPhone using Tapatalk

 

[HiHoeSilver]

Thanks! Eventually I’ll upgrade the wheels. Until then, I’ll be stuck with NBS..

You're running 16s? I thought you had something different? Find a cheap set of 01-06 z71 snowflakes in the meantime if you need to do brakes so you can upgrade.

 

[Rocket Man]

These are getting close to the rivets. It’s been needing tlc for awhile now. I work on everyone else’s and put mine off until I absolutely have too. But half contact is a first for me


Sent from my iPhone using Tapatalk

I’ve never seen that either. Are the rotors warped?

 

[dszx13]

I’ve never seen that either. Are the rotors warped?

Probably. But it would have high and low spots all over the contact area. Not consistent like that. I’m gonna pull it apart this weekend.


Sent from my iPhone using Tapatalk

 

[TheAutumnWind]

Thanks! Eventually I’ll upgrade the wheels. Until then, I’ll be stuck with NBS..

Oh you have 16s? Bummer. Lots of inexpensive wheels for these trucks available luckily. I bought some 20" welds for my old denali for $200 on craigslist.

Those are my stock 20's on the caddy tho.

 

[TheAutumnWind]

Probably. But it would have high and low spots all over the contact area. Not consistent like that. I’m gonna pull it apart this weekend.


Sent from my iPhone using Tapatalk

Pad mustve partially broken off the backing plate or something.

 

[AFYukon]

Bath, all 6 light assemblies, and bulbs. Had not aligned the lights yet.